Tyre Sealant 400ml For Tubeless Tyre, Self Repair SEALANT-400

Tyre Sealant 400ml For Tubeless Tyre, Self Repair SEALANT-400

Emergency Automatic Tubeless Tire Sealer and Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-undo is needed. One step procedure of tyre bumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage.Non-toxic and odorless. No corrosion and no damage to the tire.

Propallent gas available:
LPG--flammable but environmental friendly;
F12--non-flammable but bad to environment;
134a--non-flammable also environmental friendly.

Features:

1. Repair the tire in moment, special formula.
2. Easy to use, no extra tools needed.
3. Fast, can repair the tire with seconds with gas filling.
4. Convenient, for urgent repair, reduce potential safety hazard in driving.
5. All purpose, suitable for all vacuum tire and non-vacuum tires.
6. Well sealed, can seal 3/16 inches hole ( 0.476cm) for temporary reparing.
7. Cool down, after adding this material, can reduce the tire's temperature 3-5c degrees.
8. Environmental, adpots environmental and biodegradable material, no poison to nature.
9. Safety: adopts special anti-corrosive iingredients to prevent damage on hub caps.

Storage Condition: Keep it out of touch of children; store it in cool, dry and well-ventilated place. The storage temperature shall range 0-45℃.

Directions:

1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.