The Pedrollo PKm is a robust, reliable and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.The pumps have been remodelled and re-engineered offering the following benefits;
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
|Voltage||1 X 240V|
|Pumped Liquid||Thin, clean, chemically non aggressive liquids without abrasive particles or fibres|
|Maximum Fluid Temperature||+60C|
|Maximum Ambient Temperature||+40C|
|Maximum Suction Lift||7m (at sea level)|
|Maximum Operating Current (A)||3.4|
|Dimensions (mm) - DN1||1"|
|Dimensions (mm) - DN2||1"|
|Dimensions (mm) - L||235|
|Dimensions (mm) - H||152|
|Dimensions (mm) - H1||63|
|Dimensions (mm) - W||118|